Installation guide
User Manuals
How to Install Your Neon: Complete GuideInstallation Methods:
1. Wall mounting (most popular method)
- Preparation : Equip yourself with the necessary tools for drilling and screwing.
- Instructions : Your package contains the fixing kit suitable for your neon.
- Video tutorial: Find out how to do it with our video tutorial.
Neon with crystal-colored cable — available choices: crystal or black
2. Ceiling Suspension- If you wish to hang your neon light from the ceiling, indicate this when ordering. We will prepare the support accordingly and provide you with the necessary hanging wire.
Neon with crystal-colored cable — available choices: crystal or black
3. Hanging without Hole: The 3M alternative
- Would you prefer not to drill your wall? Consider 3M adhesive strips.
- Step 1: Separate the strips and remove the protective plastic.
- Step 2: Overlap the strips and distribute them evenly on the support.
- Step 3: Press each side of the bracket firmly against the wall for 30 seconds.
- Step 4: Stand back and admire your beautiful neon in place!
Neon Electrical Installation
Installation time: ~1 minute
Materials: neon, dimmer and remote control (optional), 12 V power supply
Steps
-
Connect the neon to the output of the dimmer.
-
Connect the dimmer to the 12 V output of the power supply (respect the + / − polarity).
-
Plug the power supply into the mains socket.
-
Turn on and adjust the neon with the remote control (make sure the remote’s batteries are working).
Notes
-
The remote lets you decrease/increase brightness and enable/modify flashing modes, if you wish.
-
If you opted for RGB LEDs, the remote also lets you change colors.
-
Without a dimmer: You can connect the neon directly to the 12 V power supply; the neon will be always on at 100% with no control.
-
Safety: Use only a suitable 12 V power supply; never connect the neon directly to 230 V.
